Rising Sun Tools Co., Ltd

Automatic used tire changing equipment for garage It is full automatic touchless tire changer used for changing car tyres whose flatness ratio is relatively small and rim diameter is between 10”-30”. Product features 1) Changing tyres of different rim diameters through adjusting changing head forward or back , when adjusted to the best position , it will be easy and smooth to change tyres and avoid hurting tyres . 2) No need the crowbar , no hurt to the rim and wheel . 3) The working head can fix position automatically and change directions quickly , it boosts speed of change tyres . 4) The high and low platents cooperate to run , it ensure the smooth tyre changing . 5) The using of automatic lifting tyres structure make changing tyres saving time and labor. 6) Machine gained Europe CE certification . Selling point 1) This automatic tire changer integrates electricity , gas , hydraulic , high-end configuration , there are dual-use tire-pressing blocks, can press tires and support tires; 2) the right arm is equipped with two dish wheels upper and lower, can automatically complete shoveling tire to the above and below tire mouth, the upper dis wheel has a automatic raised mechanical devices,it can raise automatically when rising to the upper point 3) The green button in the middle of the crossed hook head switch is sensing orientation button , pressing and holding this button, hook head will automatically stay on the tangential points of tire-pressing wheel , which is on the outer rim of the auxiliary,safe,reliable, harmless to the rim 4) The frame on the left side , can lift tire noto the clamping disc. Technic data Model RS180 Rim diameter 10”-30” Max wheel diameter 1250mm Tire width 3”-12” Working pressure 8-12bar Working voltage 380V/220V/110V Gear box motor 1.1KW Hydraulic motor 1.5kw Packing 1700*1150*1900mm,3.75cbm,599kgs Quantity / 20ft container 6pcs Quantity / 40ft container 14pcs